Description
Battery mount designed to suit the iTechWorld PS2000
Design Features
Perfectly sized to hold the PS2000 and prevent movement.
Slots provided for straps to hold the PS2000 into the mount (straps not included).
Positions the PS2000 to allow easy access to the power connections on both ends whilst the straps pass between the controls on the front.
Installation Notes
Suitable for RA model Rangers from July 2022 onward (Commonly known as “next-Gen Ranger”) and 2023+ VW Amarok
Available for vehicles with and without tub liner (see options drop-down menus above)
In vehicles with the original power outlet in the plastic panel on the left side of the tub, the battery box will completely obstruct the outlet, making it impossible access or use – For vehicles with the original 12V power outlet we strongly recommend ordering the right-side version.
No-drill installation, using original tie-down point bolt-in locations.
Whilst the rear tie-down bar remains usable, the side-wall tie-down bar is removed. You can fit an M8 eye-bolt in it’s place to provide an alternative tie-down point after the PS2000 is fitted.
Compatibility with ARB or AusMotion Compressor Mount (Right-side version only)
If your vehicle has an ARB or AusMotion bracket securing the compressor between the inner and outer skin of the tub, you can fit the right-side PS2000 mount over the top of the compressor bracket. However, you will need to relocate the air outlet if it’s fitted in ARB’s standard low level position near the tailgate. To do this we recommend using one of our replacement panels for the left side of the tub.
Material
Stainless steel
Options
To specify options use the drop-down menus above.
Which Side?
Terminology used on all AusMotion products is as shown below. In Australia, the driver’s side is the right side.
