Description
Vehicle Compatibility
Suitable for RA model Rangers from July 2022 onward (Commonly known as “Next-Gen Ranger”).
Suits vehicles with or without the plastic tub liner.
Driver side installation only.
Compressor Compatibility
Designed to suit the ARB brushless twin compressor only (ARB Part number ckblta12)
This product replaces the standard bracket provided by ARB for the compressor.
Important Installation Notes – Please read before ordering
This is a brand new product – Installed photos will be added soon
The compressor is installed in the gap between the inner and outer skins of the tub and the bracket carries the weight of it from the inside. When looking at tub you’ll see a number of indentations for mounting the compressor plus another for the air quick-connect. This is where Ford have worked with ARB to provide a defined location for the older twin compressor.
This product can be fitted either with or without a tub liner – However, if you have a tub liner you have to remove and re-fit it during installation of the compressor bracket.
To install the compressor you first mount the bracket as shown here then drill through the tub, you then get an assistant to hold the compressor up between the inner and outer skin and bolt through from the inside of the tub to secure it in position. When installed you will see the bracket as shown here plus 4 bolt heads.
No additional wiring is included with this product. Wiring is the responsibility of the installer. We recommend that wiring is carried out by a qualified auto electrician.
The factory-fitted tie-down bars have a lock of thread locking compound on them which, can make them hard to remove. During installation we recommend cleaning the threads in the bodywork using an M8 thread tap which can be found in hardware stores.
Air Hose Connection
Material
Powder coated black – The production version will be in a textured black powder coat finish to match the appearance of the tub spray-on-liner.
Australian Standard structural grade steel.
