Made to order – Please allow 2 weeks.
The perfect companion product for our Ranger (RA) behind seat battery mounts, this bracket allows installation of a DCDC battery charger on the back wall of the cab, keeping the length of cable between the charger and battery to a minimum.
As seen here, the charger sits neatly above the Ford audio amplifier (where fitted). The carpet panel doesn’t have to be cut to fit the bracket and charger, but many installer prefer to do so, allowing them to clearly see the LED indicators on Redarc chargers.
In vehicles with the premium audio system the carpet panel includes a cutout for the amplifier which can be easily extended upward as seen below. In vehicles without the premium audio system, the charger is installed in the same position and the carpet can be trimmed as desired.
Whilst many prefer to trim the carpet panel, it’s personal preference only and the charger will continue to operate as intended totally concealed behind the carpet as seen in the photo below – If you look closely you can just about see the top mounting point of the AusMootion charger bracket between the child-seat anchor point and the bodywork.
Suitable for mounting the following products
- Redarc BCDC “Classic” battery charger BCDC1225D
- Redarc BCDC “Classic” battery charger BCDC1240D
- Redarc BCDC “Classic” battery charger BCDC1250D
- Redarc BCDC “Core” Charger range
- Intervolt DCDC Pro battery charger
Redarc Charger Bundle
The no-display version of this product is available as a bundle with your choice of 25A or 40A Redarc BCDC CORE battery charger.
Simply select your charger choice from the drop-down lists above before ordering.
Optional Victron Display Mounting
The battery charger bracket is available either with or without an optional mounting position for the BMV7xx Victron battery monitor. Simply select the appropriate option from the drop-down lists above before ordering.
Suitable for RA model Rangers from July 2022 onward (Commonly known as “Next-Gen Ranger”).
Suitable for vehicles with and without the behind seat amplifier and speaker.
The perfect companion for our Ranger (RA) behind seat battery mounting system.
This bracket fits on the back wall of the cab, utilising existing holes and fixing points in the vehicle bodywork. It mounts directly above the premium audio amplifier fitted to Raptor and other models and is compatible with all vehicles both with and without the amplifier.
The contoured carpet panel on the back wall must be removed for installation. Once the bracket is fitted you may decide to cut the panel to allow visibility of the charger display (not necessary if using InterVolt chargers) before re-fitting.
Installation of the bracket takes around 30 minutes.
New nuts included.