Description
Battery Compatibility
This product has been designed to accommodate a number of manufacturer’s batteries as listed below. If you have an alternative battery, please contact us to find out if it’ll fit.
Any battery with these maximum dimensions will fit:
- Length 695mm
- Height 300mm
- Thickness 65mm
Whilst within these limits, we have a more appropriate, dedicated bracket for the iTechWorld 100SS which may be found here.
The following batteries (listed in manufacturer alphabetical order) have been tested and confirmed to fit:
Amptron
- 100Ah Lithium Blade Battery AT-LFP-12-100HV01
Baintech
- BTBLUESLIM110-DC40
- BTLP12V110-100SL
- BTLITH-1275-SL
- BTLITH -1275-SL-DCS
- BTLITH -12110-SL
- BTLITH -12110-SL-DCS
Custom Lithium
- 100Ah Super-slim lithium – Plastic and metal case versions, all terminal types.
Deep Cycle Systems (DCS)
- DCS Super Slim Line 100Ah Lithium DCS-12V-100AH-SL
- DCS Super Slim Line 120Ah Lithium DCS-12V-120AH-SL
Dingo Box
- DingoBox 105Ah slim lithium
Kickass
- Kickass 105Ah KA12105ULTRASLIM-LI
VoltX
- VOLTX 12V 100AH BLADE PREMIUM (SY12-100)
Vehicle Compatibility
Suitable for Toyota Hilux 2015 to November 2025 (Gen8 AN120, AN130)
We have not yet tested it in the new 2026 model.
Battery Charging
This product includes a universal battery charger bracket to fit to the left-hand end of the back plate as shown above. This plate includes pre-cut holes for Redarc, iTech, Victron and Intervolt chargers.
You can purchase a Redarc BCDC CORE battery charger to ship with your battery mount from our store here.
Installation Notes
Installed on the driver-side of the cab back wall.
The back plate includes pre-cut holes for two twin-midi fuse holders or two single-midi fuse holders (fuse holders not included).
No-drill installation, using original thread inserts and holes in the vehicle cab wall. No cutting of metalwork is necessary.
One hole in the cab wall cross-member needs to be tapped to convert it from a 5mm hole to an M6 bolt hole. An M6 thread tap can be purchased from hardware stores or online with fast delivery from Amazon by clicking here.
The contoured carpet panel on the back wall can remain in-position but needs four small holes cutting in it during installation.
Installation of the battery mounting bracket takes around 40 minutes.
New bolts included.
Material
Stainless steel.
Design Certification
This product is an Australian Certified Design – Our intellectual property shall be defended accordingly.
