AUSMOTION – High Quality Vehicle Accessories

Designed, Engineered and Manufactured in Australia.

Battery Mount – Hiliux (Gen 8 / N80) – Behind seat Lithium Battery Mount


Behind-seat Lithium battery mount for N80 Hilux.


Made to order – Please allow 2 weeks.

Battery Compatibility

Please select your battery from the drop-down lists above when ordering.

Custom Lithium Version

This version has been designed to fit the Custom Lithium 100Ah Ultra-Slim battery with either plastic or metal case.

Thanks to the Custom Lithium battery being more compact than some other brands, the Redarc DCDC charger is mounted on the back plate alongside the battery rather than on the end of the plate.

Baintech / DCS Version

This version has been designed to mount the following batteries from Baintech and Deep Cycle Systems (DCS):

Baintech ultra-slim lithium batteries:

  • BTLITH-1275-SL
  • BTLITH -1275-SL-DCS
  • BTLITH -12110-SL
  • BTLITH -12110-SL-DCS
  • BTLP12V110-100SL

DCS ultra-slim lithium batteries:

  • DCS-12V-100AH-SL

Amptron Version

This version has been designed to mount the following battery from Amptron:

  • AT-LFP-12-100HV01

Vehicle Compatibility

Suitable for Toyota Hilux 2015+ (Gen8 AN120, AN130)

Battery Charging

DCS, Baintech and Amptron versions include a universal battery charger bracket to fit to the left-hand end of the back plate as shown above. This plate includes pre-cut holes for Redarc BCDC chargers and Intervolt DCDC Pro chargers.

The Custom Lithium version includes pre-cut holes in the back plate for a Redarc BCDC charger.

You can purchase a Redarc BCDC CORE battery charger to ship with your battery mount from our store here.

Installation Notes

Installed on the driver-side of the cab back wall.

The back plate includes pre-cut holes for two twin-midi fuse holders or two single-midi fuse holders (fuse holders not included).

No-drill installation, using original thread inserts and holes in the vehicle cab wall. No cutting of metalwork is necessary.

One hole in the cab wall cross-member needs to be tapped to convert it from a 5mm hole to an M6 bolt hole.

The contoured carpet panel on the back wall must be removed for installation. Once the battery is mounted you may decide to cut the panel and re-fit the remaining parts, but there will be little remaining on the driver side.

Installation of the battery mounting bracket takes around 30 minutes.

New bolts included.



Stainless steel.

Design Certification

This product is an Australian Certified Design – Our intellectual property shall be defended accordingly.



Additional information

Weight 5 kg
Dimensions 70 × 39 × 6 cm
Product Type

Battery Brand

DCS and Baintech, Amptron, Custom Lithium