Universal lithium dual battery mounting solution designed to securely hold a range of batteries from leading suppliers and manufacturers behind-seat of a Ford Ranger (PX models up to July 2022)
Locally designed and manufactured in Australia.
Includes all mounting hardware and rated battery restraining straps.
Allows the jack and tools to remain in-place, easily accessed by slackening the straps and tilting the battery forward when required.
A bolt-on extension is included for use when mounting batteries that extend beyond the back plate. The extension ensures the battery is restrained laterally in both directions.
General Battery Sizing
This product has been designed to accommodate a number of manufacturer’s batteries as listed below. If you have an alternative dual battery, please contact us to find out if it’ll fit.
Any battery with these maximum dimensions will fit:
- Length 635mm
- Height 300mm
- Thickness 62mm
The following batteries (listed in manufacturer alphabetical order) have been tested and confirmed to fit:
- 100Ah Lithium Blade Battery AT-LFP-12-100HV01
- BTLP12V110-100SL (Most recent variant with screw terminals on the end)
- BTLITH -1275-SL-DCS
- BTLITH -12110-SL
- BTLITH -12110-SL-DCS
- 100Ah Super-slim lithium – Plastic and metal case versions, all terminal types.
Deep Cycle Systems (DCS)
- DCS Super Slim Line Lithium DCS-12V-100AH-SL
- DingoBox 105Ah slim lithium
- iTECH100SS 100Ah Super Slim Lithium Battery
- VOLTX 12V 100AH BLADE PREMIUM (SY12-100)
Suitable for PXI, PXII, PXIII and PX Ranger Raptor vehicles (up to July 2022)
Allows the jack and tools to remain fitted in the standard location in non-Raptor vehicles. For Raptor installations the jack extension that is fitted to the back wall will need to be relocated (we suggest placing it in the under-seat storage bin)
Also fits 2nd generation Mazda BT50.
BT50, PXI Ranger and PXII Ranger require no modification to the vehicle to install this product.
Installation on PXIII and Ranger Raptor will require a small section of the carpet on the rear cab wall to be cut out using a sharp knife. This can be done easily in the vehicle.
No-drill installation, using original Ford thread inserts in the back wall.
Using a battery larger than the dimensions given above will cause the seat back to not latch in the up position.
The straps provided with your mount may be different in colour to those shown here. We always try and source the red/green straps as shown but they are occasionally unavailable and must be substituted with an alternative colour.
Battery Charger Mounting
Our under-seat battery charger bracket is the perfect companion for the behind seat dual battery mount and is available through “related products” at the checkout.
- Stainless Steel
- Injection moulded plastic